Alarm Sensor

Door Magnetic Contact Switch

This is the perimeter protection for the premises. The magnetic contact is usually installed in exterior opening doors and windows that are reachable from the ground (or from another part of a building which is accessible from the ground - such as a garage). The contacts operate on the principle that when the door or window moves more that 1/2" from the frame, the magnetic field on the switch is removed and this breaks the alarm circuit (or zone) which trips off the system. Once tripped, the alarm signal cannot be stopped by just closing the door or window. Magnetic contacts are popular and widely used because they detect an intruder before he enters the protected premises. A disadvantage is that the contact can be compromised if the intruder enters without opening the door or window, by breaking the glass.

PIR Motion Sensor

The wired PIR Motion detector is an INPUT DEVICE, The PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames into a protected area by sensing infrared energy (heat) emitting from an intruder's‚ body moving through a protected area. The MOTION SENSOR is commonly referred to as a PIR, which stands for passive Infrared. Upon detection of intrusion, the PIR automatically generates an alarm signal to control panel. The sensor also provides a tamper contact output. The unit is RF and EMI Immunity to interferences produced by radio device. The unit is can be wall-mounted by means of a bracket.

Ionization Smoke Sensor

The Smoke Sensor is an INPUT DEVICE used for fire detection which is triggered by smoke. The two main types of SMOKE DETECTORS are photoelectric and ionization. It can use independently or as a front-end detector of an alarm system.

Glass Breakage Sensor

The Glass Breakage Sensor is An INPUT DEVICE which is triggered by the sound of breaking glass. This is the perimeter protection for the windows or glass or and other buildings. The glass break sensor is usually installed on glass doors and windows and glass walls. The glass break sensor operates on the principle that when the glass door or glass window or glass walls break by the intruder shock or hit, It will detect the glass breakage frequency, then triggers a signal to alarm system. The glass breakage sensor is popular and widely used because they detect an intruder before he enters the protected premises.

Photoelectric Smoke & Heat Detector

The Wired Smoke & Heat Detector is an INPUT DEVICE used for fire detection which is triggered by Smoke & Heat. The SM-04 is Photoelectric type. It can use independently or as a front-end detector of an alarm system. Upon detection of Smoke & Heat, the SM-04 automatically generates an alarm signal to control panel and Led indication alarm. The unit is RF and EMI Immunity to interferences produced by radio device.

Gas Leakage Detector

The Wireless Gas Leakage Detector is an INPUT DEVICE designed for natural gas,LPG detection. It can use independently or as a front-end detector of an alarm system. Upon detection of natural gas and LPG, the Gas Leakage Detector automatically generates an alarm signal to control panel and sound & flash alarm. The unit is RF and EMI Immunity to interferences produced by radio device.

Water Leakage Detector

Water Leakage Detector is a very useful unit, it can work standalone as well as work with the alarm panel. Low power consumption and high sensitive, easy to install, usually it will be installed under the water valve or water pipe to monitor the water leakage. It can use independently or as a front-end detector of an alarm system.

Vibration Sensor

This is the perimeter protection for the wall or glass or and other buildings. The vibration sensor is usually installed on doors and windows and walls. The vibration sensor operates on the principle that when the door or window or walls vibrated by the intruder shock or dig, will trigger a signal to alarm system. The vibration sensor is popular and widely used because they detect an intruder before he enters the protected premises.

Piezo Siren

The Piezo Siren is an audible OUTPUT DEVICE installed at the user & premises. The SIREN sounds a high pitched warbling tone, similar to a police car. Its purpose is to deter the intruder and draw attention to the premises.

Panic Button

Panic alarm is an electronic device designed to assist in alerting somebody in emergency situations where a threat to persons or property exists. A panic alarm is frequently but not always controlled by a concealed panic alarm button.